All

COMPATIBLE VEHICLES:Volkswagen - Golf - MK5 R32 Available in Black only A set of Silicone Coolant hoses for the R32 Mk5 Golf. Being modelled directly from the OEM hoses, these new precision engineered parts are an easy and direct replacement for the factory items, yet offer significantly greater ability to withstand much higher temperatures. Ideal on a standard car, but absolutely essential on a tuned, track or modified example! Allied to this, their superior woven fabric reinforcement and fluorosilicone internal lining, means that they will last an awful lot longer than the factory ever intended, too. Manual Gearbox cars only. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* Please note that two of the hoses will not fit the DSG models  

Read more less

Developed, designed, and influenced from our direct involvement with BTCC and success with the Hyundai i30N, we are proud to release an oil cooling solution for the Hyundai Kona N. This oil cooler radiator is lifted straight from our motorsport department, so we know that this product performs well, and has been proven in several race events and winning vehicles over the past years. The cores are durable enough to last full race seasons and are perfect for fast road and track use. The cooler has now also been utilised in both of our other Hyundai oil cooling solutions and cleverly redesigned for a 100% plug and play solution for the Kona N. During our time developing world leading products for the Kona N, we found a significant flaw with the vehicle, especially when tuned, just as we did with the I30N. Oil temperatures can climb to dangerous levels when on track or when driven hard in hotter climates. Rising oil temperatures will result in only one outcome: a reduction of sufficient lubrication of your engines internal components, which, in due course, can potentially lead to engine damage. We saw oil temperatures reduce significantly during the development of this product when locating the oil cooler heat exchanger at the front of the vehicle’s radiator grill, this allowed for superior air flow. FMOC14 is a must-have product for the keen driver to protect their vehicles longevity, and perform safely and reliably. Unlike many oil cooler kits on the market, FMOC14 keeps the factory oil to water cooler in position - this essentially doubles your engines oil cooling. This product is not to be confused with a universal oil cooler, FMOC14 has a laser cut aluminium bracket which makes for perfect fitment to the Kona N. The kit is completely bespoke for this vehicle, with perfect length braided oil lines and our intelligent sandwich plate design making for a straightforward installation. The oil cooler is also designed to be mounted in the most efficient way possible as shown in the diagram below. This is to avoid oil cavitation which can also in some cases lead to potential engine damage over a long period of time. Manufactured in Gloucester, UK, FMOC14 is made to the uppermost standard and is backed up by the Forge Motorsport lifetime warranty. The kit comes with the following:1x Forge Aluminium sandwich plate1x Twin pass oil cooler 4x M6x20 fasteners4x M6 washers2x Oil lines 4x M6 Rubber Riv nuts1x M20x1.5 adaptor1x weather stripAll the fixings required and a comprehensive fitting guide

Read more less

Developed from our direct involvement with BTCC and success with the previous generation I30N, Forge Motorsport is proud to release an oil cooler kit for the Hyundai i30N MK3.5. This oil cooler radiator is lifted straight from our motorsport department, so we know this component performs extremely well, as well as the cores tough and durable construction. Next stage was to design a kit incorporating this core which will fit the i30N Mk3.5 perfectly - the result is a bespoke oil cooler kit with true motorsport development behind it. During our time developing new products for the second generation i30N we found a significant floor with the vehicle especially when tuned. Oil temperatures can climb to dangerous levels when on track or when driven hard in hotter climates, The rising oil temperatures change the viscosity potentially thinning the oil, this will result in only one outcome, a reduction of sufficient lubrication of your engines internal components. Therefore, the FMOC13 is a must have product for the keen driver. The location of the oil cooler at the front of the vehicle’s radiator grill allows for superior air flow. During our development of this product, we have seen oil temperatures reduced significantly. Unlike many oil cooler kits, the FMOC13 keeps the factory oil to water cooler in position. This essentially doubles your engines oil cooling. This new product is not to be confused with a universal oil cooler. FMOC13 has a laser cut aluminium bracket which makes for perfect fitment to the i30N crash bar and has an incorporated side ducting which guides air flow through the core. Manufactured in Gloucester UK, FMOC13 is made to the uppermost standard and is backed up by the Forge Motorsport lifetime warranty. It is available in raw finish or black powder coat finish for the stealthier look. We’ve incorporated a thermostat that is built into the oil cooler sandwich plate, this has been set to open at 85C as this was observed to be the optimal working temperature of the oil cooler when testing, this means the engine is working at its most efficient oil temperature range however hard you push the vehicle.   The kit comes with the following: 1x Forge aluminium sandwich plate1x twin pass oil cooler 4x M6x20 fasteners4x M6 washers2x oil lines 4x M6 Rubber Riv nuts1X M20x1.5 adaptor1X weather stripAll the fixings required 

Read more less

Fits Peugeot 308 GTI MK2 Proven to withstand temperatures up to 2500°F or 1370°C Prolongs the life of engine components Improves the appearance of the 308’s engine bay Stainless Steel Rivets and Fasteners Carbon fabric outer shell Calcium Magnesium Silicate Wool constructed Inner Core High temperature Silica fabric   The Forge Motorsport FMTUBL14 is a turbo blanket that has been specifically designed for the Peugeot 308 GTI MK2. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. The OE heat shield still allows a considerable amount of heat transfer thus creating a warmer engine compartment, which will have an effect on the engines components and increase intake temperatures. This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500°F of radiant heat which will assist in protecting and prolonging the life of engine components. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power. As a bonus the FMTUBL14 improves the appearance of the 308’s engine bay considerably, The OEM turbo heat shield tarnishes over many heat cycles, a problem which does not affect Forge Motorsport turbo blankets. All Forge Motorsport turbo blankets are designed and manufactured to the highest standards and use superior materials, unlike some turbo blankets which are constructed using substandard materials.

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

The Forge Motorsport FMTUB11 has been designed for the Alfa Romeo MiTo QV. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500°F (1370°C) of radiant heat which will assist in protecting and prolonging the life of engine components.   Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power.  

Read more less

Forge Motorsport 208 GTi hardpipes replace the turbo to intercooler and intercooler to throttle body plastic pipes on the top of your engine. We also include the silicon hose exiting the turbo which is available in red, blue or black. fits: CitroënDS3(Pre 2016 Only)Peugeot208GTIGTI 2016 Onwards These pipes are more free flowing than stock by removing the resonators and can be fitted to the stock intercooler hoses, or our full front mounting intercooler kit FMINT208GTi. PLEASE NOTE: THIS WILL ONLY FIT THE GTI MODEL AND NOT THE GT WITH 156BHP   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

An alloy header tank for the R58 Model Cooper S. This simply replaces old stock header tank, and reuses the stock water cap from your old header tank.   fits: MiniSecond generation (R55/R56/R57/R58/R59) (2006–2015)R58 CoupeLCI 2012-2015R59 RoadsterCooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18) Hand crafted and polished in the UK making for an easy fitment and replacement. If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Intercooler Resonator delete hose fits the 2007 onwards BMW Mini Cooper S. This hose replaces the two OEM hoses and a sound resonator. The purpose of the OEM resonator is to reduce the roar / whoosh noise that can often be associated with air passing through pipe work. By removing this resonator with a smooth bore hose the resistance is reduced. Several of our competitors claim horsepower gains for the installation of this type of hose, but our own testing showed these to be marginal so we prefer not to make such claims. We did however see change in the torque characteristics with between 10 and 15 ft/lbs improvement on our own test car. It is always difficult to quantify gains for a specific product as a lot will depend on other modifications that have been carried out. fits: MiniSecond generation (R55/R56/R57/R58/R59) (2006–2015)R55 ClubmanPre LCI 2007-2009 N14/N18 R56 HatchbackPre LCI 2007-2009 N14R57 ConvertibleLCI 2010-2014Typically if the car is running tuned software with a free lowing downpipe and exhaust, changes made on the intake, with the fitment of this hose and or a intake filter kit will be more dramatic. From a drivers perspective, after fitting this hose on its own, we did not perceive any increase in noise, but there was a noticeable change in the willingness for the engine to accelerate, which can be associated with the torque improvement and small gain in horsepower.As an added bonus this hose is available in red, blue, or black (a real stealth install) and will withstand greater temperatures and pressures than the original hose.   •    The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.•    This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.•    The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically•    The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.•    Lifetime warranty* *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is polished alloy header tank for the 2011 onwards Cooper S Diesel (2 Litre). It is a direct replacement, utilising the original mountings and tank pressure cap. Hand crafted and polished in the UK making for an easy fitment and replacement. fits: MiniSecond generation (R55/R56/R57/R58/R59) (2006–2015)R55 ClubmanLCI 2010-2014R56 HatchbackLCI 2010-2014R57 ConvertibleLCI 2010-2014R58 CoupeCooper SD 2.0 Turbo Diesel (N47)R59 RoadsterCooper SD 2.0 Turbo Diesel (N47) If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A set of 4 Silicone Coolant Hoses for R53 ( up to 2007) Model Mini Cooper S The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   *T&C’s apply FITS: MiniFirst generation (R52/53) (2000–2006)R52 Convertible 2005 - 2009Cooper S 1.6 Supercharged Petrol (W11)R53 Hatchback 2002 - 2006Cooper S 1.6 Supercharged Petrol (W11)   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Developed from our direct involvement with the Mini Challenge series, Forge is proud to release an oil cooler adapter plate for the BMW Mini B48 engine found in the Mini Cooper S and JCW models (2013-2015). FITS: MiniF60 Countryman 2017-Cooper S 2.0 Turbo Petrol (B48)Third generation (F54/F55/F56/F57)F54 Clubman 2015-2019Cooper S 2.0 Turbo Petrol (B48)JCW 2.0 Turbo Petrol (B48) DetailsF56/F55 Hatchback 2014-Cooper S 2.0 Turbo Petrol (B48)JCW 2.0 Turbo Petrol (B48 Up To 2021)  Cooper S 2.0 Turbo Petrol (B48)F57 Convertible 2016-Cooper S 2.0 Turbo Petrol (B48) This kit allows the fitment of an external oil cooler in location of your choice, ideal if you are preparing a track or racecar that is using non-standard bodywork or mounting points.  In the Box:1x Billet Aluminium adapter plate1x Plug bolt1x Copper washer2x Adapters M22 to AN-102x Bonded washers *FMOC7 replaces the BMW OEM part P/n: 11428585236   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A set of 8 silicone coolant hoses for the BMW Mini / Clubman/ Countryman Cooper S ( 2007 on N14 engine ) fits: MiniCountryman 2010 - 2016Cooper S 1.6 Turbo Petrol (N18)Second generation (R55/R56/R57/R58/R59) (2006–2015)R55 ClubmanPre LCI 2007-2009 N14/N18 R56 HatchbackPre LCI 2007-2009 N14R57 ConvertibleLCI 2010-2014 The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Developed from our direct involvement within the BTCC and Mini Challenge race series where we have provided race proven cooling packages, we have directly transferred our knowledge from this over to our road going products. FMOC11 has been developed with the same engineering expertise that is applied to our Mini Challenge Oil coolers, these see extensive driving over the race season calendar, so we are proud to give the I30N the same motorsport treatment. Lowering your oil temps on and off the track whilst providing a product that does not skimp on quality, so much so that it is backed by our Forge Lifetime Guarantee* With our extensive range of performance parts out on the market allowing the limits of the i30N/Veloster N to be pushed in the chase for top power gains, the addition of power and speed creates heat. Rising oil temperatures will result in only one outcome, a reduction of sufficient lubrication of your engines internal components. Therefore, the FMOC11 is a must have product for the keen driver, the location of the oil cooler radiator at the front of the vehicle’s radiator grill allows for superior air flow. During our development of this product we have seen oil temperatures reduced significantly. The Hyundai oil cooler has its inlet and outlets placed in the correct position for optimum flow , when oil coolers are fitted upside-down this can lead to cavitation (air locks) within the system, this can over a prolonged period of time lead to engine fatigue and potentially internal component damage due to insufficient engine lubrication. Unlike many oil cooler kits, the FMOC11 keeps the factory oil to water cooler in position. This essentially doubles your engines oil cooling. We’ve also developed the kit to use a bespoke laser cut aluminium bracket which makes for perfect fitment to the i30N crash bar. Supplied with the kit are 2x pre-assembled, high quality double braided AN-8 oil lines. We’ve incorporated a thermostat that is built into the oil cooler sandwich plate, this has been set to open at 85C as this was observed to be the optimal working temperature of the oil cooler when testing, this means the engine is working at its most efficient oil temperature range however hard you push the vehicle.   The kit comes with the following: 1x Forge Aluminium sandwich plate1x Twin pass oil cooler 4x M6x20 fasteners4x M6 washers2x Oil lines 4x M6 Rubber Riv nuts1X M20x1.5 adaptorAll the fixings required    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Here we present FMCT5, a twin catch can and coolant expansion tank system. This design has been subject to a vast amount of development and is a one of a kind product in the marketplace.  The FMCT5 is a direct replacement for the OE coolant expansion tank. The CAD laser cut alloy construction is skilfully welded at Forge UK HQ. The expansion tank has a level indicator inside the filler neck, to make topping up easier, we have also machined a cap cover that slots over the top of the OEM cap to add to the premium look. The twin catch can system is the definitive solution to effectively reduce sludge and carbon build up, in turn allowing the engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one, we recommend, particularly if you are planning more advanced power tuning in the future.  Our system filters both PCV and intake breather systems to help keep your engine clean from harmful contaminants, including oil deposits, unused fuel vapours and moisture, which would ordinarily make their way back through to the inlet of the engine. All of this is now collected in the catch cans. There is a dip stick for each tank to measure the amount of deposit caught, this opening can also be used to pump out the captured contaminants or alternately you can use the drain plugs at the bottom of the tanks. As with all Forge Motorsport products we have used superior braided hoses which are internally constructed from anti-static smooth fuel resistant nitrile rubber. This is combined with an outer cover made from reinforced stainless-steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F). The FMCT5 is available in raw aluminium finish or our stealthy textured black powder coat finish. Highlights A drain plug for ease of emptying Coolant level indicator Integrated dipstick’s for simple level inspection CNC machined anodised coolant cap cover Premium Quality stainless steel reinforced oil resistant hoses with black external braiding Inner tube is constructed from anti-static smooth fuel resistant nitrile rubber Outer cover is constructed from reinforced Stainless-Steel wire braid consisting of partial inner braid & full cover outer braiding which is resistant to pressure expansion and vacuum collapse Temperature Range: -54°C to +150°C (-65°F to 300°F) The engine cover can still be fitted after installation Installation is straight forward with all necessary fittings and Forge detailed instructions included.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A set of six coolant hoses for both the Hyundai i30n and Veloster N, which replace six of the OEM rubber hoses in the coolant system.  Forge designed these silicone hoses to withstand pressures that can be experienced on tuned and remapped engines. They will long outlast the original hoses and with our limited lifetime warranty on all Forge products, you can be sure these hoses won't let you down. Complete with all hose clamps required. Available in red, blue, or black - Please select your choice in the options above when ordering. We recommend you give yourself one hour to two hours to install all the hoses, remember that you will have to drain your coolant to fit these so make sure to have a tray to catch all the coolant.   TOUCHSHAREFULLSCREEN This interactive image was created with ThingLink.View this image on thinglink.com.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Designed by Forge to replace the original component on the Renault Megane 225/230 Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACMEG Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Working with in the limited space available surrounding the OEM side-mount chargecooler radiator and looking to develop the most efficient heat exchanger for the space available. Forge Motorsport has developed this compact V-mount radiator setup for the Mercedes A45 AMG (2.0L M133 Engine). Increasing the available core surface area by 43.5% over the OEM component. FITS: MercedesA Class W176 (2012-2018)A45AMG (2013-2015)CLA Class C117 (2013-2019)CLA45 (2013-2015)GLA Class X156 (2014-2019)GLA45 (Facelift 2015-) Featuring OEM style CNC machined couplers for direct fitment to the pre-existing chargecooler coolant pipework. No cutting of hoses or removal of couplers required. The laser cut radiator surround, clips into the OEM ducting and utilises the cold air feed from the front bumper. Refined design. This part has been carefully designed and developed using the latest Solidworks 3D CAD software. Researched, designed, developed, and handmade in Great Britain.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

The Forge turbo blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team on the Forge VW Golf MK1 Race car in the harshest of environments and exceeding all expectations, the Forge turbo blanket is designed to assist in the protection and prolonging the life of the engine components. FITS: HondaCivicType R(FK2 2015-2017)(FK8 2017-2021) ·       Stainless Steel Rivets·       Stainless Steel Fasteners·       Carbon fabric Outer Shell·       Calcium Magnesium Silicate Wool constructed Inner Core·       High temperature silica fabric The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power.  Interior Surface: ·       Max Temperature Rating: 2300°F/1260°C·       Continuous Use Limit: 1832°F1000°C Exterior Surface: ·       Direct Contact Limit: 1800°F/982°C·       Radiant Heat Limit: 2500°F/1371°C   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This pair of Forge turbo blankets are designed for the N54 and designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team on the Forge VW Golf MK1 Race car in the harshest of environments and exceeding all expectations, the Forge turbo blanket is designed to assist in the protection and prolonging the life of the engine components. FITS: 1 SeriesE82 2Dr Coupe 2007-20131M 2011-2012 (N54)E88 2Dr Convertible 2007-2013135i 2007-2010 (N54)1M1ME82 2dr Coupe 2011-2012 (N54)3 SeriesE90/E91/E92/E93 Coupe/Convertible/Saloon/Estate 2004-2013335i 2006-2009 (N54) ·       Stainless Steel Rivets·       Stainless Steel Fasteners·       Carbon fabric Outer Shell·       Calcium Magnesium Silicate Wool constructed Inner Core·       High temperature silica fabric The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power.  Interior Surface: ·       Max Temperature Rating: 2300°F/1260°C·       Continuous Use Limit: 1832°F1000°C Exterior Surface: ·       Direct Contact Limit: 1800°F/982°C·       Radiant Heat Limit: 2500°F/1371°C   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

The Forge Motorsport FMTUBL4 has been specifically designed for the Mini R56 stock turbo charger, and also fits the Peugeot 207/208 GTI. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. The stock Mini heat shield is inadequate and can result in warping the standard air scoop located in the bonnet. This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500 °f of radiant heat which will assist in protecting and prolonging the life of engine components. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power. Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as this can cause damage to the blanket.   ·       Stainless Steel Rivets ·       Stainless Steel Fasteners ·       Carbon fabric outer shell ·       Calcium Magnesium Silicate Wool constructed Inner Core ·       High temperature Silica fabric   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A set of three coolant hoses for the Suzuki Swift Sport 1.4 ZC33S, which replace three of the OEM rubber hoses in the coolant system. The kit consists of the upper radiator hose, lower radiator hose, and radiator overflow hose. Forge designed these silicone hoses so they can withstand pressures that can be experienced on tuned and remapped engines. They will long outlast the original hoses and with our limited lifetime warranty on all Forge products, you can be sure these hoses won't let you down. Available in red, blue, or black - Please select your choice in the options above when ordering. A complete High quality stainless steel hose clamp set for the above hoses are available from the drop down menu. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically Lifetime warranty*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

The Forge Motorsport FMTUBL5 has been designed for the Fiat 500, 595, and 695 turbo (this will not fit those fitted with IHI turbo). This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. FITS: Fiat500500Euro 6 Abarth595145BHPCompetizione 180BHPTrofeo 160BHP  Turismo 165BHP695XSR Yamaha Limited Edition 165BHP  Rivale 180BHPPuntoEvo 2010-2015Abarth Multiair This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500°F (1370°C) of radiant heat which will assist in protecting and prolonging the life of engine components. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power. Simple to fit using existing OEM hardware. Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as this can cause damage to the blanket. ·       Stainless Steel Rivets·       Carbon fabric outer shell·       Calcium Magnesium Silicate Wool constructed Inner Core·       High temperature Silica fabric   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

PLEASE NOTE: This Oil Cooler Kit has been designed for use in conjunction with the Forge Motorsport front mount intercooler (FMINT500). It will not fit with the OEM intercooler. Forge Motorsport cannot confirm fitment with any other manufacturers' aftermarket intercooler. The Forge Motorsport oil cooler kit for the Fiat 500/595/695 uses a custom fabricated oil cooler with a large core dimension of 165(w) x 200(h) x 47mm(d). Although there are lots of universal oil coolers on the market, this oil cooler has been specifically designed to fit perfectly in the Fiats OEM intercoolers location, The oil cooler is manufactured at Forge Motorsport’s HQ in Gloucestershire, England by our highly skilled fabricators and carries a lifetime warranty*.Sitting in full air flow and mounted correctly with the oil flowing into the top of the oil cooler and exiting though the lower outlet, this avoids any chance of cavitation occurring within the oil cooler. Many people mount their oil coolers incorrectly which in turn stops them from working as well as they could. The oil filter housing on modern Fiat engines does not allow for the previously common take off plates to fit under the filter and divert oil into an oil cooler mounted elsewhere on the vehicle. Instead they now use an oil to water cooling ‘block’ bolted to the front of the engine, and in many cases an undersized filter or a paper drop in element, which prevents easy fitting of an oil cooler. As many people have found, if the vehicle is tuned or driven hard, oil temperatures can rocket to over 120°C (250°F) being easily achieved, which is close to the point that engine oil starts to break down. Therefore, it is essential to fit a Forge Motorsport oil cooler to your modified Fiat 500. Forge Motorsport have designed a CNC machined billet adaptor that replaces the oil to water cooling block. Although it still allows coolant to circulate, it more importantly offers two AN-10 take offs which allow fitment of the supplied oil cooler lines between the cooler itself and the Fiats engine oil galleries. In turn, this means oil temperatures can be significantly reduced resulting in an engine that can be worked harder for longer. The whole oil cooler unit has been designed to use the OEM intercoolers ducting to ensure maximum airflow is achieved creating the most superior oil kit on the market that is 100% plug and play. Perfect for track and fast road use on any Fiat 500.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less